Tinjauan Pustaka Pengembangan Desain Mata Punch pada  Proses Punching Multi Plate Pipe

Naufal Eka Prasetya; Dan Mugisidi

doi:10.22236/teknoka.v10i1.22724

Penulis

Naufal Eka Prasetya Universitas Muhammadiyah Prof. DR. HAMKA
Dan Mugisidi Universitas Muhammadiyah Prof. DR. HAMKA

DOI:

https://doi.org/10.22236/teknoka.v10i1.22724

Kata Kunci:

Development, Punch Eye, Multi Plate Pipe Punching

Abstrak

Proses punching multi plate pipe merupakan salah satu teknologi manufaktur yang krusial dalam industri modern, khususnya dalam pembuatan komponen pipa berlubang dengan presisi tinggi. Penelitian ini bertujuan untuk mengkaji pengembangan desain mata punch yang optimal untuk meningkatkan efisiensi dan kualitas produk pada proses punching multi plate pipe. Metode yang diterapkan dalam penelitian-analisis literatur deskriptif dengan mengkaji berbagai sumber referensi relevan mengenai desain punch, material, dan parameter proses punching. Hasil penelitian menunjukkan bahwa desain mata punch yang optimal harus mempertimbangkan faktor geometri, pemilihan material, sistem pendinginan, dan analisis keausan. Inovasi material seperti tool steel dengan baja paduan tinggi serta coating khusus terbukti dapat meningkatkan umur pakai. Simulasi Finite Element Analysis (FEA) menjadi alat yang efektif untuk optimasi desain sebelum implementasi actual. Penelitian ini memberikan rekomendasi desain mata punch yang dapat diaplikasikan secara praktis dalam industri manufaktur untuk meningkatkan produktivitas dan mengurangi biaya produksi.

Unduhan

Data unduhan belum tersedia.

Referensi

N. Dodd, E. Ballantyne, G. Heron, and R. Goodall, “Multi-layer laser cutting of electrical steel sheets applied to electric machine laminations,” PLoS One, vol. 18, no. 7 July, pp. 1–13, 2023, doi: 10.1371/journal.pone.0288232.

P. Dergisi, “Evaluation of surface and dimensional phenomena in punching of DP800 advanced strength steel utilising the Cockcroft-Latham Damage Model Cockcroft-Latham hasar modeli kullanılarak DP800 ileri mukavemetli çelik delme - zımbalama işleminde yüzey ve boyut ol,” vol. 0900, doi: 10.2339/politeknik.1770895.

M. Szada-Borzyszkowska, W. Kacalak, Ł. Bohdal, and W. Szada-Borzyszkowski, “Analysis of the Process and Results of High-Pressure Abrasive Water Jet Multilayer Cutting of Electrical Steel,” Materials, vol. 17, no. 1, 2024, doi: 10.3390/ma17010094.

T. Sathish, N. Sabarirajan, and S. Karthick, “Analysis and design of smart paper punching machine for spiral binding,” Mater Today Proc, vol. 33, pp. 2564–2566, 2020, doi: 10.1016/j.matpr.2019.12.105.

Ł. Bohdal, L. Kukiełka, R. Patyk, K. Kośka, J. Chodór, and K. Czyżewski, “Experimental and numerical studies of tool wear processes in the nibbling process,” Materials, vol. 15, no. 1, 2022, doi: 10.3390/ma15010107.

W. Lortz and E. Govekar, “Advanced modelling for grinding - From friction to ploughing and dynamic chip formation with temperatures,” Procedia CIRP, vol. 102, pp. 79–84, 2021, doi: 10.1016/j.procir.2021.09.014.

B. B., “Effect Of Material Properties And Cutting Parameters On Burr Formation During Milling Of Pre And Post Thermally Treated AA6061-T6 Alloys,” Sep. 2018.

E. Al-momani and I. Rawabdeh, “An Application of Finite Element Method and Design of Experiments in the Optimization of Sheet Metal Blanking Process,” Jordan Journal of Mechanical and Industrial Engineering, vol. 2, no. 1, pp. 53–63, 2008.

O. Cavusoglu, “An Investigation of Punch Radius and Clearance Effects on the Sheet Metal Blanking Process,” International Journal of Automotive Science and Technology, vol. 6, pp. 309–316, Dec. 2022, doi: 10.30939/ijastech.1190699.

Y. Liu, Q. Li, Z. Ren, Z. Jiang, H. Luo, and X. Zhang, “Effect of Process Parameters on Stress Field of Laser Additive Manufacturing,” Machines, vol. 10, p. 1197, Dec. 2022, doi: 10.3390/machines10121197.

D. Gustafsson, S. Parareda, L. Ortiz-Membrado, A. Mateo, E. Jiménez-Piqué, and E. Olsson, “Simulation of metal punching and trimming using minimal experimental characterization,” J Mater Process Technol, vol. 321, p. 118148, Sep. 2023, doi: 10.1016/j.jmatprotec.2023.118148.

A. Mahmudah, G. Kiswanto, and D. Priadi, “Analysis of shear edge quality for different punch velocities in micro-blanking process,” International Journal of Mechanical Engineering and Robotics Research, vol. 6, no. 4, pp. 279–284, 2017, doi: 10.18178/ijmerr.6.4.279-284.

Y. Kurniawan, M. Mahardika, and D. Suyitno, “The Effect Of Punch Geometry On Punching Process In Titanium Sheet,” J Teknol, vol. 82, Feb. 2020, doi: 10.11113/jt. v82.13947.

M. Ji, J. Xu, D. Yu, M. Chen, and M. El Mansori, “Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics,” J Manuf Process, vol. 68, pp. 646–656, Aug. 2021, doi: 10.1016/J.JMAPRO.2021.05.012.

C. Chen, Z. Xiao, H. Zhu, and X. Zeng, “Distribution and evolution of thermal stress during multi-laser powder bed fusion of Ti-6Al-4 V alloy,” J Mater Process Technol, vol. 284, p. 116726, Oct. 2020, doi: 10.1016/J.JMATPROTEC.2020.116726.

P. Elmiawan, F. Paundra, and G. T. Pradibyo, “Optimasi Desain Mesin Punch Menggunakan Metode Finite Element Analysis,” J-Proteksion, vol. 6, no. 2, pp. 41–48, Feb. 2022, doi: 10.32528/jp.v6i2.6834.

A. K. Kumaresh, B. Balaji, and M. R. Kumar, “DESIGN AND ANALYSIS OF PUNCHING DIE.” [Online]. Available: http://ijret.esatjournals.org

H. Shan et al., “Friction stud riveting (FSR) of thick high-strength aluminum alloy structure,” Int J Mach Tools Manuf, vol. 177, p. 103889, Jun. 2022, doi: 10.1016/J.IJMACHTOOLS.2022.103889.

L. Fernandes, F. J. G. Silva, and R. Alexandre, “Study of TiAlN PVD coating on stamping dies used in tinplate food package production,” Micromachines (Basel), vol. 10, no. 3, 2019, doi: 10.3390/mi10030182.

T. Tang et al., “Topology Optimization: A Review for Structural Designs Under Statics Problems,” Materials, vol. 17, no. 23, 2024, doi: 10.3390/ma17235970.