Tinjauan Pustaka Pengembangan Desain Mata Punch pada Proses Punching Multi Plate Pipe
DOI:
https://doi.org/10.22236/teknoka.v10i1.22724Keywords:
Development, Punch Eye, Multi Plate Pipe PunchingAbstract
The multi-plate pipe punching process is a crucial manufacturing technology in modern industry, especially in the manufacture of high-precision perforated pipe components. This study aims to examine the development of an optimal punch eye design to improve efficiency and product quality in the multi-plate pipe punching process. The method applied in this research is descriptive literature analysis by reviewing various relevant reference sources on punch design, materials, and punching process parameters. The results show that the optimal punch design must consider geometric factors, material selection, cooling systems, and wear analysis. Material innovations such as tool steel with high alloy steel and special coatings have been proven to increase service life. Finite Element Analysis (FEA) simulation is an effective tool for design optimization prior to actual implementation. This study provides punch eye design recommendations that can be practically applied in the manufacturing industry to increase productivity and reduce production costs.
Downloads
References
N. Dodd, E. Ballantyne, G. Heron, and R. Goodall, “Multi-layer laser cutting of electrical steel sheets applied to electric machine laminations,” PLoS One, vol. 18, no. 7 July, pp. 1–13, 2023, doi: 10.1371/journal.pone.0288232.
P. Dergisi, “Evaluation of surface and dimensional phenomena in punching of DP800 advanced strength steel utilising the Cockcroft-Latham Damage Model Cockcroft-Latham hasar modeli kullanılarak DP800 ileri mukavemetli çelik delme - zımbalama işleminde yüzey ve boyut ol,” vol. 0900, doi: 10.2339/politeknik.1770895.
M. Szada-Borzyszkowska, W. Kacalak, Ł. Bohdal, and W. Szada-Borzyszkowski, “Analysis of the Process and Results of High-Pressure Abrasive Water Jet Multilayer Cutting of Electrical Steel,” Materials, vol. 17, no. 1, 2024, doi: 10.3390/ma17010094.
T. Sathish, N. Sabarirajan, and S. Karthick, “Analysis and design of smart paper punching machine for spiral binding,” Mater Today Proc, vol. 33, pp. 2564–2566, 2020, doi: 10.1016/j.matpr.2019.12.105.
Ł. Bohdal, L. Kukiełka, R. Patyk, K. Kośka, J. Chodór, and K. Czyżewski, “Experimental and numerical studies of tool wear processes in the nibbling process,” Materials, vol. 15, no. 1, 2022, doi: 10.3390/ma15010107.
W. Lortz and E. Govekar, “Advanced modelling for grinding - From friction to ploughing and dynamic chip formation with temperatures,” Procedia CIRP, vol. 102, pp. 79–84, 2021, doi: 10.1016/j.procir.2021.09.014.
B. B., “Effect Of Material Properties And Cutting Parameters On Burr Formation During Milling Of Pre And Post Thermally Treated AA6061-T6 Alloys,” Sep. 2018.
E. Al-momani and I. Rawabdeh, “An Application of Finite Element Method and Design of Experiments in the Optimization of Sheet Metal Blanking Process,” Jordan Journal of Mechanical and Industrial Engineering, vol. 2, no. 1, pp. 53–63, 2008.
O. Cavusoglu, “An Investigation of Punch Radius and Clearance Effects on the Sheet Metal Blanking Process,” International Journal of Automotive Science and Technology, vol. 6, pp. 309–316, Dec. 2022, doi: 10.30939/ijastech.1190699.
Y. Liu, Q. Li, Z. Ren, Z. Jiang, H. Luo, and X. Zhang, “Effect of Process Parameters on Stress Field of Laser Additive Manufacturing,” Machines, vol. 10, p. 1197, Dec. 2022, doi: 10.3390/machines10121197.
D. Gustafsson, S. Parareda, L. Ortiz-Membrado, A. Mateo, E. Jiménez-Piqué, and E. Olsson, “Simulation of metal punching and trimming using minimal experimental characterization,” J Mater Process Technol, vol. 321, p. 118148, Sep. 2023, doi: 10.1016/j.jmatprotec.2023.118148.
A. Mahmudah, G. Kiswanto, and D. Priadi, “Analysis of shear edge quality for different punch velocities in micro-blanking process,” International Journal of Mechanical Engineering and Robotics Research, vol. 6, no. 4, pp. 279–284, 2017, doi: 10.18178/ijmerr.6.4.279-284.
Y. Kurniawan, M. Mahardika, and D. Suyitno, “The Effect Of Punch Geometry On Punching Process In Titanium Sheet,” J Teknol, vol. 82, Feb. 2020, doi: 10.11113/jt. v82.13947.
M. Ji, J. Xu, D. Yu, M. Chen, and M. El Mansori, “Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics,” J Manuf Process, vol. 68, pp. 646–656, Aug. 2021, doi: 10.1016/J.JMAPRO.2021.05.012.
C. Chen, Z. Xiao, H. Zhu, and X. Zeng, “Distribution and evolution of thermal stress during multi-laser powder bed fusion of Ti-6Al-4 V alloy,” J Mater Process Technol, vol. 284, p. 116726, Oct. 2020, doi: 10.1016/J.JMATPROTEC.2020.116726.
P. Elmiawan, F. Paundra, and G. T. Pradibyo, “Optimasi Desain Mesin Punch Menggunakan Metode Finite Element Analysis,” J-Proteksion, vol. 6, no. 2, pp. 41–48, Feb. 2022, doi: 10.32528/jp.v6i2.6834.
A. K. Kumaresh, B. Balaji, and M. R. Kumar, “DESIGN AND ANALYSIS OF PUNCHING DIE.” [Online]. Available: http://ijret.esatjournals.org
H. Shan et al., “Friction stud riveting (FSR) of thick high-strength aluminum alloy structure,” Int J Mach Tools Manuf, vol. 177, p. 103889, Jun. 2022, doi: 10.1016/J.IJMACHTOOLS.2022.103889.
L. Fernandes, F. J. G. Silva, and R. Alexandre, “Study of TiAlN PVD coating on stamping dies used in tinplate food package production,” Micromachines (Basel), vol. 10, no. 3, 2019, doi: 10.3390/mi10030182.
T. Tang et al., “Topology Optimization: A Review for Structural Designs Under Statics Problems,” Materials, vol. 17, no. 23, 2024, doi: 10.3390/ma17235970.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Prosiding Seminar Nasional Teknoka
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Supported by :
