Tinjauan Pustaka: Pengaruh Temperatur Udara keluar Terhadap Proses Penguapan
DOI:
https://doi.org/10.22236/teknoka.v10i1.22656Keywords:
Outlet air temperature,Evaporation process, Energy efficiency, Drying system, Thermal performanceAbstract
The evaporation process is strongly influenced by air temperature, particularly the outlet air temperature, which determines the rate of moisture removal and energy efficiency. This literature review analyzes studies on the impact of outlet air temperature on evaporation performance across various applications, including drying systems, cooling towers, and desalination units. Findings from previous research indicate that higher outlet air temperatures generally increase the evaporation rate due to enhanced vapor pressure differences, yet may reduce overall energy efficiency if not properly controlled. Conversely, optimized airflow and moderate temperature gradients promote stable evaporation with lower energy losses. The reviewed literature highlights the importance of balancing thermal and aerodynamic parameters to achieve effective and sustainable evaporation processes. This review aims to provide a theoretical foundation for improving evaporative system design through precise control of outlet air temperature.
Downloads
References
R. K. Das and A. Date, “Sustainable watedesalination using eductor and waste heat: A review and suggestion for future research,” Desalination, vol. 603, no. October 2024, p. 118687, 2025, doi: 10.1016/j.desal.2025.118687.
M. Shojaei et al., “Performance analysis of a direct contact humidifier of a humidification-dehumidification desalination system: A heat and mass transfer,” Desalin. Water Treat., vol. 12, no. 1, pp. 49–55, 2017, doi: 10.23960/mech.v6.i1.201507.
W. Zhang, X. Du, L. Yang, and Y. Yang, “Research on Performance of Finned Tube Bundles of Indirect Air-cooled Heat Exchangers,” Math. Model. Eng. Probl., vol. 3, no. 1, pp. 47–51, 2016, doi: 10.18280/mmep.030108.
D. Charitar and A. Madhlopa, “Integration of waste heat in thermal desalination technologies: A review,” J. Energy South. Africa, vol. 33, no. 1, pp. 68–84, 2022, doi: 10.17159/2413-3051/2022/v33i1a5434.
S. KUMAR and P. CHANDRA, “Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process,” J. Therm. Eng., vol. 10, no. 2, pp. 479–489, 2024, doi: 10.18186/thermal.1456708.
D. S. Wijayanto, Soenarto, M. B. Triyono, W. Prasetyo, and I. Widiastuti, “Analysis of Longitudinal Finned Pipes in Cross-Flow Heat Exchanger,” Int. J. Heat Technol., vol. 39, no. 6, pp. 1909–1916, 2021, doi: 10.18280/ijht.390627.
M. O. Khalaf, M. R. Özdemir, and H. S. Sultan, “A Comprehensive Review of Solar Still Technologies and Cost: Innovations in Materials, Design, and Techniques for Enhanced Water Desalination Efficiency,” Water (Switzerland), vol. 17, no. 10, pp. 1–55, 2025, doi: 10.3390/w17101515.
G. Cui, M. Bi, and C. Liu, “Design and experimental validation of a six-effect multi-effect evaporation plant utilized in oilfield,” Desalin. Water Treat., vol. 217, pp. 111–126, 2021, doi: 10.5004/dwt.2021.26891.
A. T. S. Haji, R. Wirosoedarmo, and M. W. Tyas, “Analisis Nomografi Suhu, Laju Penguapan dan Tekanan Udara untuk Perancangan Alat Desalinasi Tenaga Surya Dengan Pengaturan Vakum,” J. Sumberd. Alam dan Lingkung., vol. 4, no. 2, pp. 1–6, 2017, doi: 10.21776/ub.jsal.2017.004.02.1.
I. Sulistiono, D. Mugisidi, Nurkholid, and Oktarina Heriyani, “Effect of wind speed on evaporation rate in air conditioner based desalination units,” TEKNOSAINS J. Sains, Teknol. dan Inform., vol. 12, no. 1, pp. 54–61, 2025, doi: 10.37373/tekno.v12i1.1238.
Y. Effendi and A. Rosyidin, “Efek vortex generators terhadap peningkatan perpindahan panas pada aliran melewati heated tubes,” Turbo J. Progr. Stud. Tek. Mesin, vol. 9, no. 2, pp. 221–227, 2020, doi: 10.24127/trb.v9i2.1303.
T. M. Thomas and P. S. Mahapatra, “A plate-type condenser platform with engineered wettability for space applications,” 2023, [Online]. Available: http://arxiv.org/abs/2305.19070
O. Heriyani, D. Mugisidi, and I. Hilmi, “Effect of Cylinder Surface Roughness To the Distance Formation of Vortex,” SINTEK J. J. Ilm. Tek. Mesin, vol. 14, no. 2, p. 94, 2020, doi: 10.24853/sintek.14.2.94-98.
A. T. Sayuti, D. Mugisidi, R. Wirangga, and O. Heriyani, “The Influence of Water Temperature on Seawater Evaporation in the Desalination Process,” SINTEK J. J. Ilm. Tek. Mesin, vol. 17, no. 2, p. 113, 2023, doi: 10.24853/sintek.17.2.113-119.
M. Fahri Fadlu Robbi and B. Yunianto, “Studi Numerik Pengaruh Aspek Rasio Dari Perforated Concave Delta Winglet Terhadap Performa Termal-Hidrolik Aliran Udara Melewati Tube Di Dalam Saluran,” J. Tek. Mesin S-1, vol. 11, no. 3, p. 201, 2023.
I. Yaningsih and T. Istanto, “Pengaruh Jenis Humidifier (Spray Humidifier dan Pad Humidifier)Terhadap Produktivitas Unit Desalinasi Berbasis Pompa Kalor Dengan Menggunakan Proses Humidifikasi dan Dehumidifikasi,” Mechanical, vol. 6, no. 1, pp. 49–55, 2015, doi: 10.23960/mech.v6.i1.201507.
A. P. H. J. Gajanan Kalyankar, “Heat Transfer Enhancement Through Swirl Flow Devices,” Int. J. Innov. Eng. Res. Technol., vol. 2018, pp. 198–200, 2018.
M. Fiebig, A. Grosse-Gorgemann, Y. Chen, and N. K. Mitra, “Conjugate heat transfer of a finned tube part a: Heat transfer behavior and occurrence of heat transfer reversal,” Numer. Heat Transf. Part A Appl., vol. 28, no. 2, pp. 133–146, 1995, doi: 10.1080/10407789508913737.
M. D. De Carvalho, J. S. Dos Reis Coimbra, T. S. M. Lemos, J. D. A. Bellido, and A. M. de O. Siqueira, “a Review of Humidification-Dehumidification Desalination Systems,” Int. J. Res. -GRANTHAALAYAH, vol. 8, no. 5, pp. 290–311, 2020, doi: 10.29121/granthaalayah.v8.i5.2020.225.
V. G. Gude, “Exergy evaluation of desalination processes,” ChemEngineering, vol. 2, no. 2, pp. 1–27, 2018, doi: 10.3390/chemengineering2020028.
T. " Peringkat, A. Oktavian, D. Mugisidi, R. Alamsyach, and O. Heriyani, “Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan Inovasi Convective Coefficient and Evaporative in Forced Flow Solar Still Koefisien Konveksi dan Evaporasi pada Solar Still Aliran Paksa Article information,” vol. 6, pp. 351–360, 2024.
W. Chamsa-ard, D. Fawcett, C. C. Fung, and G. Poinern, “Solar Thermal Energy Stills for Desalination: A Review of Designs, Operational Parameters and Material Advances,” J. Energy Power Technol., vol. 2, no. 4, 2020, doi: 10.21926/jept.2004018.
H. Yang, C. Yang, and L. Geng, “Thermodynamic limits of humidifiers and dehumidifiers,” iScience, vol. 27, no. 7, p. 110277, 2024, doi: 10.1016/j.isci.2024.110277.
A. H. Mohammed, A. N. Shmroukh, N. M. Ghazaly, and A. E. Kabeel, “Active solar still with solar concentrating systems, Review,” J. Therm. Anal. Calorim., vol. 148, no. 17, pp. 8777–8792, 2023, doi: 10.1007/s10973-023-12285-z.
C. Z. Liang, M. Askari, L. T. (Simon) Choong, and T. S. Chung, “Ultra-strong polymeric hollow fiber membranes for saline dewatering and desalination,” Nat. Commun., vol. 12, no. 1, 2021, doi: 10.1038/s41467-021-22684-1.
J. Liu, Y. Sun, Y. Zhang, and J. Wang, “Theoretical Study of a Closed-Cycle Evaporation System for Seawater Desalination,” Separations, vol. 10, no. 5, 2023, doi: 10.3390/separations10050319.
O. Younis et al., “Comprehensive Review on Solar Stills—Latest Developments and Overview,” Sustain., vol. 14, no. 16, 2022, doi: 10.3390/su141610136.
N. Ghazouani et al., “Greenhouse Desalination by Humidification–Dehumidification Using a Novel Green Packing Material,” Water (Switzerland), vol. 14, no. 6, pp. 1–14, 2022, doi: 10.3390/w14060869.
N. Ghazouani, A. A. El-bary, G. E. Hassan, N. Becheikh, and A. Bawadekji, “Solar Desalination by Humidification – Dehumidification :,” 2022.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Prosiding Seminar Nasional Teknoka
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Supported by :
