Review Pengaruh Jenis Material Atap terhadap Efisiensi Pemanenan Energi dengan Piezoelektrik sebagai Konverter Energi Mekanik menjadi Energi Listrik

Muhammad Fahmi Nurhidayat; Rifky; Kurnia Sandi Oktaris; Pandu Kusuma Pangestu; Reyhan Martin Firnanda; M. Ravi Cahya Firdaus

doi:10.22236/teknoka.v10i1.22505

Penulis

Muhammad Fahmi Nurhidayat Universitas Muhammadiyah Prof. Dr. Hamka
Rifky Universitas Muhammadiyah Prof. Dr. Hamka
Kurnia Sandi Oktaris Universitas Muhammadiyah Prof. Dr. Hamka
Pandu Kusuma Pangestu Universitas Muhammadiyah Prof. Dr. Hamka
Reyhan Martin Firnanda Universitas Muhammadiyah Prof. Dr. Hamka
M. Ravi Cahya Firdaus Universitas Muhammadiyah Prof. Dr. Hamka

DOI:

https://doi.org/10.22236/teknoka.v10i1.22505

Kata Kunci:

piezoelectric, raindrop energy, energy converter, smart roof, renewable energy

Abstrak

Raindrops hitting the roof material and the falling rainwater exerting pressure on the roof can be utilized as a power source with piezoelectrics as a converter of mechanical energy into electrical energy. The purpose of this research is to find the right roof material to produce maximum electrical power and efficiency in harvesting the energy of falling rainwater. This research method is carried out by comparing three types of roof materials placed on top of the piezoelectric. The falling rainwater will press the roof material and piezoelectric, thus producing electricity in the form of voltage and current measured with a multitester. The measurement data is processed into electrical power and efficiency. The results of the study found that the type of roof material affects the performance of the piezoelectric as an energy converter.

Unduhan

Data unduhan belum tersedia.

Referensi

Y. Wu, Y. Ma, H. Zheng, and S. Ramakrishna, “Piezoelectric materials for flexible and wearable electronics: A review,” Mater. Des., vol. 211, 2021, doi: 10.1016/j.matdes.2021.110164.

C. Covaci and A. Gontean, “Piezoelectric energy harvesting solutions: A review,” Sensors (Switzerland), vol. 20, no. 12, pp. 1–37, 2020, doi: 10.3390/s20123512.

Z. Yang, S. Zhou, J. Zu, and D. Inman, “High-Performance Piezoelectric Energy Harvesters and Their Applications,” Joule, vol. 2, no. 4, pp. 642–697, 2018, doi: 10.1016/j.joule.2018.03.011.

R. Mishra, S. Jain, and C. D. Prasad, “A review on piezoelectric material as a source of generating electricity and its possibility to fabricate devices for daily uses of army personnel,” Int. J. Syst. Control Commun., vol. 6, no. 3, pp. 212–221, 2015, doi: 10.1504/IJSCC.2015.068908.

D. G. Wakshume and M. Ł. Płaczek, “Optimizing Piezoelectric Energy Harvesting from Mechanical Vibration for Electrical Efficiency: A Comprehensive Review,” Electron., vol. 13, no. 5, 2024, doi: 10.3390/electronics13050987.

M. Safaei, H. A. Sodano, and S. R. Anton, “A review of energy harvesting using piezoelectric materials: State-of-the-art a decade later (2008-2018),” Smart Mater. Struct., vol. 28, no. 11, 2019, doi: 10.1088/1361-665X/ab36e4.

K. V. Beard and C. Chuang, “A New Model for the Equilibrium Shape of Raindrops,” 1987. doi: 10.1175/1520-0469(1987)044<1509:anmfte>2.0.co;2.

H. B. Wobus, F. W. Murray, and L. R. Koenig, “Calculation of the Terminal Velocity of Water Drops,” vol. 10, pp. 751–754, 1971.

M. Thurai, V. Bringi, P. Gatlin, and M. Wingo, “Raindrop fall velocity in turbulent flow: An observational study,” Adv. Sci. Res., vol. 18, no. 2020, pp. 33–39, 2021, doi: 10.5194/asr-18-33-2021.

V. Bringi, M. Thurai, and D. Baumgardner, “Raindrop fall velocities from an optical array probe and 2-D video disdrometer,” Atmos. Meas. Tech., vol. 11, no. 3, pp. 1377–1384, 2018, doi: 10.5194/amt-11-1377-2018.

G. B. Foote and P. S. Du Toit, “Terminal Velocity of Raindrops Aloft,” 1969. doi: 10.1175/1520-0450(1969)008<0249:tvora>2.0.co;2.

M. I. Bin, “Design and Analysis of Piezoelectric Configuration for Raindrop Energy Harvester Muhammad Izrin Bin Izhab Universiti Sains Malaysia 2018 Design and Analysis of Piezoelectric Configuration for Raindrop Energy Harvester,” 2018.

F. Y. Testik and A. Bolek, “Wind and Turbulence Effects on Raindrop Fall Speed,” J. Atmos. Sci., vol. 80, no. 4, pp. 1065–1086, 2023, doi: 10.1175/JAS-D-22-0137.1.

R. Gunn and G. D. Kinzer, “the Terminal Velocity of Fall for Water Droplets in Stagnant Air,” 1949. doi: 10.1175/1520-0469(1949)006<0243:ttvoff>2.0.co;2.

R. S. Dahiya and M. Valle, Robotic tactile sensing: Technologies and system, vol. 9789400705791. 2014. doi: 10.1007/978-94-007-0579-1.

W. G. Cady, Piezoelectricity: An Introduction to the Theory and Applications of Electromechanical Phenomena in Crystals, 1st ed. New York: McGraw-Hill Book Company, Inc., 1946.

J.-F. Li, Lead-Free Piezoelectric Materials. Weinheim: Wiley-VCH, 2021.

N. Sezer and M. Koç, “A comprehensive review on the state-of-the-art of piezoelectric energy harvesting,” Nano Energy, vol. 80, no. August 2020, 2021, doi: 10.1016/j.nanoen.2020.105567.

H. S. Kim, J. H. Kim, and J. Kim, “A review of piezoelectric energy harvesting based on vibration,” Int. J. Precis. Eng. Manuf., vol. 12, no. 6, pp. 1129–1141, 2011, doi: 10.1007/s12541-011-0151-3.

H. Shaukat, A. Ali, S. Bibi, W. A. Altabey, M. Noori, and S. A. Kouritem, “A Review of the Recent Advances in Piezoelectric Materials, Energy Harvester Structures, and Their Applications in Analytical Chemistry,” Appl. Sci., vol. 13, no. 3, 2023, doi: 10.3390/app13031300.

A. Ali, S. Iqbal, and X. Chen, “Recent advances in piezoelectric wearable energy harvesting based on human motion: Materials, design, and applications,” Energy Strateg. Rev., vol. 53, no. April, p. 101422, 2024, doi: 10.1016/j.esr.2024.101422.

D. Amalia et al., “Application Of Piezoelectric Energy Harvesting At Airports: Energy Sources, Materials And Design,” INTECOMS J. Inf. Technol. Comput. Sci., vol. 7, no. 5, pp. 1561–1571, 2024, doi: 10.31539/intecoms.v7i5.11807.

E. Brusa, A. Carrera, and C. Delprete, “A Review of Piezoelectric Energy Harvesting: Materials, Design, and Readout Circuits,” Actuators, vol. 12, no. 12, 2023, doi: 10.3390/act12120457.

B. Li, Z. Xie, H. Liu, L. Tang, and K. Chen, “A Review of Ultrathin Piezoelectric Films,” Materials (Basel)., vol. 16, no. 8, 2023, doi: 10.3390/ma16083107.

Q. He and J. Briscoe, “Piezoelectric Energy Harvester Technologies: Synthesis, Mechanisms, and Multifunctional Applications,” ACS Appl. Mater. Interfaces , vol. 16, no. 23, pp. 29491–29520, 2024, doi: 10.1021/acsami.3c17037.

B. ZHANG, H. LIU, S. ZHOU, and J. GAO, “A review of nonlinear piezoelectric energy harvesting interface circuits in discrete components,” Appl. Math. Mech., vol. 43, no. 7, pp. 1001–1026, 2022.

M. Üç and C. Elitaş, “Life Cycle Costing for Sustainability,” in Handbook of Research on Waste Management Techniques for Sustainability, no. Life Cycle Cost, 2016, pp. 96–107. doi: 10.4018/978-1-4666-9723-2.ch005.

A. Aabid et al., “A systematic review of piezoelectric materials and energy harvesters for industrial applications,” Sensors, vol. 21, no. 12, pp. 1–27, 2021, doi: 10.3390/s21124145.

L. Shehu, J. H. Yeon, and Y. Song, “Piezoelectric Energy Harvesting for Civil Engineering Applications,” Energies, vol. 17, no. 19, pp. 1–33, 2024, doi: 10.3390/en17194935.