Review Studi Konfigurasi Rangkaian Piezoelektrik (Seri vs Paralel) dalam Pemanenan Energi Hujan

Reyhan Martin Firnanda; Rifky

Penulis

Reyhan Martin Firnanda Universitas Muhammadiyah Prof. Dr. Hamka
Rifky Universitas Muhammadiyah Prof. Dr. Hamka

Kata Kunci:

piezoelectric, rain energy, harvesting, series circuit, parallel circuit

Abstrak

This study aims to examine the effect of series and parallel piezoelectric circuit configurations on the system's ability to deliver greater current and better power stability. The objective of the study is to obtain greater electrical power from series and parallel circuits. This research method is carried out by comparing series and parallel circuits on a number of piezoelectrics that will produce voltage and electric current. Data processing will obtain electrical power and the efficiency of the mechanical energy conversion system into electricity, in this case the piezoelectric. The results found that the type of piezoelectric circuit affects electrical power and efficiency. This shows that the use of piezoelectrics as an energy harvesting device can be an alternative solution for producing small-scale, environmentally friendly electrical energy.

Unduhan

Data unduhan belum tersedia.

Referensi

J. Lumintang, J. Rantung, and B. Maluegha, “Pemodelan Konversi Energi Listrik Dari Curah Hujan Melalui Transduser Piezoelektrik Berbasis Ansys,” J. Poros Tek. Mesin Unsrat, vol. 13, no. 2, pp. 82–93, 2024.

B. W. Mila Anggreni Valemtina, Eva Magdalena Silalahi, “PERANCANGAN PROTOTYPE PEMBANGKIT PIEZOELEKTRIK LANTAI UNTUK SUPLAI ENERGI LISTRIK LAMPU PENERANGAN PINTU MASUK RUMAH,” JITET (Jurnal Inform. dan Tek. Elektro Ter., vol. 13, no. January, pp. 1475–1485, 2025, doi: 10.23960/jitet.v13i1.5983.

Arief, Jotje, and Benny, “Pemanen Energi Listrik Dari Curah Hujan Melalui Transduser Piezoelektrik Secara Seri Dan Paralel,” J. Poros Tek. Mesin Unsrat, vol. 12, pp. 1–12, 2022.

R. Ekawita, R. A. Salam, N. Kusumawardani, and E. Yuliza, “Pengujian Konfigurasi Piezoelektrik Penghasil Tegangan Listrik Dari Energi Mekanik,” JoP, vol. 6, no. 2, pp. 1–6, 2021.

G. Yusran et al., “Analisis Tegangan Keluaran Piezoelektrik Prosiding Seminar Nasional Teknik Elektro Volume 11 Tahun 2025,” 2025.

C. Covaci and A. Gontean, “Piezoelectric Energy Harvesting Solutions : A Review,” 2020.

E. Brusa and A. Carrera, “A Review of Piezoelectric Energy Harvesting : Materials , Design , and Readout Circuits,” 2023.

M. A. Ilyas and J. Swingler, “Towards a prototype module for piezoelectric energy harvesting from raindrop impacts,” Energy, 2017, doi: 10.1016/j.energy.2017.02.071.

M. Moreno, J. A. Morales-viscaya, and M. X. Cuevas-gayosso, “Optimized equivalent circuit models for series-parallel configurations of piezoelectric transducers in energy harvesting,” pp. 1–20, 2025, doi: 10.1371/journal.pone.0323682.

N. Sezer and M. Koç, “A comprehensive review on the state-of-the-art of piezoelectric energy harvesting,” Nano Energy, vol. 80, no. November 2020, p. 105567, 2021, doi: 10.1016/j.nanoen.2020.105567.

H. Shaukat, A. Ali, S. Bibi, W. A. Altabey, M. Noori, and S. A. Kouritem, “A Review of the Recent Advances in Piezoelectric Materials, Energy Harvester Structures, and Their Applications in Analytical Chemistry,” Appl. Sci., vol. 13, no. 3, 2023, doi: 10.3390/app13031300.

Y. Meng, G. Chen, and M. Huang, “Piezoelectric Materials: Properties, Advancements, and Design Strategies for High-Temperature Applications,” Nanomaterials, vol. 12, no. 7, 2022, doi: 10.3390/nano12071171.

S. R. Anton and H. A. Sodano, “A review of power harvesting using piezoelectric materials (2003-2006),” Smart Mater. Struct., vol. 16, no. 3, 2007, doi: 10.1088/0964-1726/16/3/R01.

A. Erturk and D. J. Inman, “An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations,” Smart Mater. Struct., vol. 18, no. 2, 2009, doi: 10.1088/0964-1726/18/2/025009.

H. Liu, J. Zhong, C. Lee, S. W. Lee, and L. Lin, “A comprehensive review on piezoelectric energy harvesting technology: Materials, mechanisms, and applications,” Appl. Phys. Rev., vol. 5, no. 4, 2018, doi: 10.1063/1.5074184.

D. Almanda, E. Dermawan, A. I. Ramadhan, E. Diniardi, and A. N. Fajar, “Analisis Desain Optimum Model Piezoelektrik Pvdf Untuk Sumber Pembangkit Listrik Air Hujan Berskala Mini,” Semin. Nas. Sains dan Teknol. 2015, no. November 2015, pp. 1–5, 2015, [Online]. Available: https://jurnal.umj.ac.id/index.php/semnastek/article/viewFile/493/459

S. Mohammadpourfazeli, S. Arash, A. Ansari, S. Yang, K. Mallick, and R. Bagherzadeh, “Future prospects and recent developments of polyvinylidene fluoride (PVDF) piezoelectric polymer; fabrication methods, structure, and electro-mechanical properties,” RSC Adv., vol. 13, no. 1, pp. 370–387, 2023, doi: 10.1039/d2ra06774a.

M. Habib, I. Lantgios, and K. Hornbostel, “A review of ceramic, polymer and composite piezoelectric materials,” J. Phys. D. Appl. Phys., vol. 55, no. 42, 2022, doi: 10.1088/1361-6463/ac8687.

C. I. Pîrvu, A. Sover, and M. Abrudeanu, “Participation of Polymer Materials in the Structure of Piezoelectric Composites,” Polymers (Basel)., vol. 16, no. 24, 2024, doi: 10.3390/polym16243603.

R. M. Syriac, A. B. Bhasi, and Y. V. K. S. Rao, “A review on characteristics and recent advances in piezoelectric thermoset composites,” AIMS Mater. Sci., vol. 7, no. 6, pp. 772–787, 2020, doi: 10.3934/MATERSCI.2020.6.772.

W. Zhang, Y. Zhang, X. Yan, Y. Hong, and Z. Yang, “Challenges and progress of chemical modification in piezoelectric composites and their applications,” Soft Sci., vol. 3, no. 2, 2023, doi: 10.20517/ss.2022.33.

X. Zhou et al., “Review on piezoelectric actuators: materials, classifications, applications, and recent trends,” 2024. doi: 10.1007/s11465-023-0772-0.

V. O. C. Concha et al., “Properties, characterization and biomedical applications of polyvinylidene fluoride (PVDF): a review,” J. Mater. Sci., vol. 59, no. 31, pp. 14185–14204, 2024, doi: 10.1007/s10853-024-10046-3.

S. P. Muduli, L. Lipsa, and S. Parida, “Current trends of characterization techniques for PVDF and related composite piezoelectric materials for nanogenerator,” Discov. Polym., vol. 2, no. 1, 2025, doi: 10.1007/s44347-025-00025-5.

D. Kumar, P. Kumar, N. N. K. Borah, Siddhartha, M. Singh, and U. Singh, “Piezoelectric properties of PVDF and green synthesized metal oxide nanocomposite thin films,” Indian J. Phys., vol. 99, no. 8, pp. 2861–2868, 2025, doi: 10.1007/s12648-024-03526-4.

S. Mahboubizadeh, S. T. Dilamani, and S. Baghshahi, “Piezoelectricity performance and β-phase analysis of PVDF composite fibers with BaTiO3 and PZT reinforcement,” Heliyon, vol. 10, no. 3, p. e25021, 2024, doi: 10.1016/j.heliyon.2024.e25021.

L. Paralı, “The output performance evaluations of multilayered piezoelectric nanogenerators based on the PVDF-HFP/PMN-35PT using various layer-by-layer assembly techniques,” J. Mater. Sci. Mater. Electron., vol. 35, no. 11, pp. 1–20, 2024, doi: 10.1007/s10854-024-12557-w.

S. Roundy, P. K. Wright, and J. Rabaey, “A study of low level vibrations as a power source for wireless sensor nodes,” Comput. Commun., vol. 26, no. 11, pp. 1131–1144, 2003, doi: 10.1016/S0140-3664(02)00248-7.

H. S. Kim, J. H. Kim, and J. Kim, “A review of piezoelectric energy harvesting based on vibration,” Int. J. Precis. Eng. Manuf., vol. 12, no. 6, pp. 1129–1141, 2011, doi: 10.1007/s12541-011-0151-3.

S. Priya and D. J. Inman, Energy harvesting technologies. 2009. doi: 10.1007/978-0-387-76464-1.

F. Viola, P. Romano, R. Miceli, G. Acciari, and C. Spataro, “Piezoelectric model of rainfall energy harvester,” 2014 9th Int. Conf. Ecol. Veh. Renew. Energies, EVER 2014, 2014, doi: 10.1109/EVER.2014.6844093.

A. Sunard and A. Gamayel, “Pemanfaatan Pantulan Bola Karet sebagai Pemanen Energi pada Piezoelektrik,” Pros. Semin. Nas. Teknoka, vol. 3, no. 2502, p. 49, 2019, doi: 10.22236/teknoka.v3i0.2914.

D. Grzybek and P. Micek, “Impact of series and parallel connection of macro fiber composite patches in piezoelectric harvester on energy storage,” Energies, vol. 14, no. 9, 2021, doi: 10.3390/en14092379.

Y. Arimurti, Y. Radiyono, and S. Surantoro, “Studi Awal Implementasi Transduser Piezoelektrik sebagai Piranti Pemanen Energi pada Lantai,” J. Ilmu Fis. | Univ. Andalas, vol. 12, no. 2, pp. 89–97, 2020, doi: 10.25077/jif.12.2.89-97.2020.

G. Maestri, L. B. Ferreira, P. Bachmann, A. A. M. Paim, C. Merlini, and F. Steffens, “Recent advances in piezoelectric textile materials: A brief literature review,” J. Eng. Fiber. Fabr., vol. 18, 2023, doi: 10.1177/15589250231151242.

M. Ali, M. J. Bathaei, E. Istif, S. N. H. Karimi, and L. Beker, “Biodegradable Piezoelectric Polymers: Recent Advancements in Materials and Applications,” Adv. Healthc. Mater., vol. 12, no. 23, pp. 1–32, 2023, doi: 10.1002/adhm.202300318.

W. Zhou, D. Du, Q. Cui, C. Lu, Y. Wang, and Q. He, “Recent Research Progress in Piezoelectric Vibration Energy Harvesting Technology,” Energies, vol. 15, no. 3, 2022, doi: 10.3390/en15030947.

X. Wang et al., “Research trends of piezoelectric materials in neurodegenerative disease applications,” Bioact. Mater., vol. 52, no. April, pp. 366–392, 2025, doi: 10.1016/j.bioactmat.2025.06.022.

J. Liu, G. Tian, W. Yang, and W. Deng, “Recent progress in flexible piezoelectric devices toward human-machine interactions,” Soft Sci., vol. 2, no. 4, 2022, doi: 10.20517/ss.2022.23.

J. Rödel and J. F. Li, “Lead-free piezoceramics: Status and perspectives,” MRS Bull., vol. 43, no. 8, pp. 576–580, 2018, doi: 10.1557/mrs.2018.181.

M. Acosta et al., “BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives,” Appl. Phys. Rev., vol. 4, no. 4, 2017, doi: 10.1063/1.4990046.