Review Pengaruh Jenis Material Atap terhadap Efisiensi Pemanenan Energi dengan Piezoelektrik sebagai Konverter Energi Mekanik menjadi Energi Listrik
DOI:
https://doi.org/10.22236/teknoka.v10i1.22718Keywords:
roofing materials, energy, harvesting, piezoelectric, converter, efficiencyAbstract
Raindrops hitting the roof material and the falling rainwater exerting pressure on the roof can be utilized as a power source with piezoelectrics as a converter of mechanical energy into electrical energy. The purpose of this research is to find the right roof material to produce maximum electrical power and efficiency in harvesting the energy of falling rainwater. This research method is carried out by comparing three types of roof materials placed on top of the piezoelectric. The falling rainwater will press the roof material and piezoelectric, thus producing electricity in the form of voltage and current measured with a multitester. The measurement data is processed into electrical power and efficiency. The results of the study found that the type of roof material affects the performance of the piezoelectric as an energy converter.
Downloads
References
D. Rahmawati, M. Ulum, M. Farisal, and K. Joni, “Lantai Pembangkit Listrik Menggunakan Piezoelektrik dengan Buck Converter LM2596,” J. Arus Elektro Indones., vol. 7, no. 3, p. 84, 2021, doi: 10.19184/jaei.v7i3.28128.
A. W. Azhar, M. H. Al-Fikri, R. I. Sulasmono, N. Sholikhah, N. A. Wafiyah, and C. P. Dewi, “Elektroof: Smart roof as an energy independent solution for Indonesia in the future,” IOP Conf. Ser. Earth Environ. Sci., vol. 847, no. 1, 2021, doi: 10.1088/1755-1315/847/1/012033.
B. Margoleno and P. Negeri Bengkalis, “Rancang Bangun Pembangkit Listrik Tenaga Getar Dengan MemanfaatkanPiezoelektrik,” Semin. Nas. Ind. dan Teknol., pp. 107–122, 2018.
M. G. Kang, W. S. Jung, C. Y. Kang, and S. J. Yoon, “Recent progress on PZT based piezoelectric energy harvesting technologies,” Actuators, vol. 5, no. 1, 2016, doi: 10.3390/act5010005.
T. Li and P. S. Lee, “Piezoelectric Energy Harvesting Technology: From Materials, Structures, to Applications,” Small Struct., vol. 3, no. 3, 2022, doi: 10.1002/sstr.202100128.
E. Brusa, A. Carrera, and C. Delprete, “A Review of Piezoelectric Energy Harvesting: Materials, Design, and Readout Circuits,” Actuators, vol. 12, no. 12, 2023, doi: 10.3390/act12120457.
J. R. Andrade, “Piezoelectric Energy Harvesting: A Comprehensive Review and Applications,” pp. 1–12, 2022.
W. Hidayatullah, M. Syukri, and Syukriyadin, “Perancangan Prototype Penghasil Energi Listrik Berbahan Dasar Piezoelectrik,” KITEKTRO J. Online Tek. Elektro, vol. 1, no. 3, pp. 63–67, 2016.
Abdul Fajar Kallawa, Agus Fikri, and Mohammad Mujirudin, “Pengaruh Rangkaian Seri Dan Paralel Terhadap Tegangan Pada Piezoelektrik,” Met. J. Manufaktur, Energi, Mater. Tek., vol. 1, no. 2, pp. 52–57, 2023, doi: 10.22236/metalik.v1i2.11041.
A. Doria, G. Fanti, G. Filipi, and F. Moro, “Development of a novel piezoelectric harvester excited by raindrops,” Sensors (Switzerland), vol. 19, no. 17, 2019, doi: 10.3390/s19173653.
A. Bouhamed et al., “A Comprehensive Review of Strategies toward Efficient Flexible Piezoelectric Polymer Composites Based on BaTiO3 for Next-Generation Energy Harvesting,” Energies, vol. 17, no. 16, 2024, doi: 10.3390/en17164066.
N. H. bin A. R. Norkharziana Mohd Nayan, Mohd Fahmi A.Razak, Azuwa Ali, Siti Khodijah Mazalan, Ami Nurul Nazifah Abdullah, “Development of Rain Harvester using Piezoelectric Sensor Jurnal Teknologi,” J. Teknol., no. August, pp. 1–6, 2015.
G. Acciari et al., “Piezoelectric Rainfall Energy Harvester Performance by an Advanced Arduino-Based Measuring System,” IEEE Trans. Ind. Appl., vol. 54, no. 1, pp. 458–468, 2018, doi: 10.1109/TIA.2017.2752132.
K. Uchino, The Development of Piezoelectric Materials and the New Perspective, 2nd ed. Elsevier Ltd., 2017. doi: 10.1016/b978-0-08-102135-4.00001-1.
H. Liu, J. Zhong, C. Lee, S. W. Lee, and L. Lin, “A comprehensive review on piezoelectric energy harvesting technology: Materials, mechanisms, and applications,” Appl. Phys. Rev., vol. 5, no. 4, 2018, doi: 10.1063/1.5074184.
S. Das Mahapatra et al., “Piezoelectric Materials for Energy Harvesting and Sensing Applications: Roadmap for Future Smart Materials,” Adv. Sci., vol. 8, no. 17, 2021, doi: 10.1002/advs.202100864.
E. Listijorini et al., “Rancang Bangun ALPENLIBE (Alat Pemanen Energi Listrik Berbasis Piezoelektrik) Sebagai Upaya Mewujudkan Energi Terbarukan,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 7, no. 1, pp. 1–7, 2024, [Online]. Available: https://creativecommons.org/licenses/by-sa/4.0/
A. Aabid et al., “A systematic review of piezoelectric materials and energy harvesters for industrial applications,” Sensors, vol. 21, no. 12, pp. 1–27, 2021, doi: 10.3390/s21124145.
X. D. Xie and Q. Wang, “Design of a piezoelectric harvester fixed under the roof of a high-rise building,” Eng. Struct., vol. 117, pp. 1–9, 2016, doi: 10.1016/j.engstruct.2016.03.018.
F. Viola, “Comparison among different rainfall energy harvesting structures,” Appl. Sci., vol. 8, no. 6, 2018, doi: 10.3390/app8060955.
N. Wu, B. Bao, and Q. Wang, “Review on engineering structural designs for efficient piezoelectric energy harvesting to obtain high power output,” Eng. Struct., vol. 235, no. March, p. 112068, 2021, doi: 10.1016/j.engstruct.2021.112068.
B. Bao and Q. Wang, “Small-scale experimental study on the optimisation of a rooftop rainwater energy harvester using electromagnetic generators in light rains,” Int. J. Energy Res., vol. 44, no. 13, pp. 10778–10796, 2020, doi: 10.1002/er.5726.
R. Guigon, J. J. Chaillout, T. Jager, and G. Despesse, “Harvesting raindrop energy: Experimental study,” Smart Mater. Struct., vol. 17, no. 1, 2008, doi: 10.1088/0964-1726/17/01/015039.
D. R. Putra et al., “Energi Alternatif Melalui Getaran Beban Mekanis,” Pros. Semin. Nas. Teknoka, vol. 3, no. 2502, p. 8, 2018, doi: 10.22236/teknoka.v3i0.2802.
Y. Wu, Y. Ma, H. Zheng, and S. Ramakrishna, “Piezoelectric materials for flexible and wearable electronics: A review,” Mater. Des., vol. 211, p. 110164, 2021, doi: 10.1016/j.matdes.2021.110164.
W. V. Kean and B. E. Hons, “DEVELOPMENT OF A DYNAMIC MODEL FOR RAINDROP ENERGY by Declaration of Authorship,” 2017.
Y. Meng, G. Chen, and M. Huang, “Piezoelectric Materials: Properties, Advancements, and Design Strategies for High-Temperature Applications,” Nanomaterials, vol. 12, no. 7, 2022, doi: 10.3390/nano12071171.
M. Acosta et al., “BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives,” Appl. Phys. Rev., vol. 4, no. 4, 2017, doi: 10.1063/1.4990046.
R. Di Leo, M. Viscardi, F. P. Tuccinardi, and M. Visone, “Numerical Modelling of a Piezo Roof Harvesting System: The Right Component Selection,” Arch. Mech. Eng., vol. 64, no. 2, pp. 257–282, 2017, doi: 10.1515/meceng-2017-0016.
A. M. Eltamaly and K. E. Addoweesh, “Transactions on Power Electronics A Novel Self Power SSHI Circuit for Piezoelectric Energy Harvester,” vol. 8993, no. c, 2016, doi: 10.1109/TPEL.2016.2636903.
S. Guerin, S. A. M. Tofail, and D. Thompson, “Organic piezoelectric materials : milestones and potential,” NPG Asia Mater., vol. 12, pp. 1–5, 2019, doi: 10.1038/s41427-019-0110-5.
S. Zhang, F. Li, F. Yu, and X. Jiang, “Review Recent Developments in Piezoelectric Crystals,” vol. 55, no. 5, pp. 419–439, 2018.
D. Vatansever, R. L. Hadimani, T. Shah, and E. Siores, “An investigation of energy harvesting from renewable sources with PVDF and PZT,” Smart Mater. Struct., vol. 20, no. 5, 2011, doi: 10.1088/0964-1726/20/5/055019.
L. Shehu, J. H. Yeon, and Y. Song, “Piezoelectric Energy Harvesting for Civil Engineering Applications,” Energies, vol. 17, no. 19, pp. 1–33, 2024, doi: 10.3390/en17194935.
A. Susanti, D. P. Sari, M. A. Nauzy, S. Widaningsih, Y. Hamdiyanti, and K. Novianingsih, “Rainwater Pressure Electic Generator Model Using Piezoelectric,” Indones. J. Multidiciplinary Res., vol. 1, no. 1, pp. 11–16, 2021, doi: 10.17509/ijomr.v1i1.33666.
D. Pratama, I. Qiram, and A. Mukhtar, “Pengaruh Sudut Kemiringan Dan Jenis Material Atap Terhadap Tegangan Listrik Yang Dihasilkan Piezolektrik,” V-MAC (Virtual Mech. Eng. Artic., vol. 6, no. 2, pp. 71–74, 2021, doi: 10.36526/v-mac.v6i2.1521.
Y. R. Wang, W. T. Lin, and B. J. Huang, “Rain-Induced Vibration Energy Harvesting Using Nonlinear Plates with Piezoelectric Integration and Power Management,” Sensors, vol. 25, no. 14, 2025, doi: 10.3390/s25144347.
M. A. Ilyas and J. Swingler, “Piezoelectric energy harvesting from raindrop impacts,” Energy, vol. 90, pp. 796–806, 2015, doi: 10.1016/j.energy.2015.07.114.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Prosiding Seminar Nasional Teknoka
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Supported by :
