Tinjauan Pustaka: Pengaruh Temperatur Udara keluar Terhadap Proses Penguapan

Salman Alfariz; Dan Mugisidi

doi:10.22236/teknoka.v10i1.22656

Penulis

Salman Alfariz Universitas Muhammadiyah Prof. DR. HAMKA
Dan Mugisidi Universitas Muhammadiyah Prof. DR. HAMKA

DOI:

https://doi.org/10.22236/teknoka.v10i1.22656

Kata Kunci:

Outlet air temperature,Evaporation process, Energy efficiency, Drying system, Thermal performance

Abstrak

Proses penguapan sangat dipengaruhi oleh temperatur udara, khususnya temperatur udara keluar, yang menentukan laju penghilangan uap air serta efisiensi energi sistem. Tinjauan pustaka ini menganalisis berbagai penelitian mengenai pengaruh temperatur udara keluar terhadap kinerja proses penguapan pada berbagai aplikasi, seperti sistem pengeringan, menara pendingin, dan unit desalinasi. Hasil dari penelitian sebelumnya menunjukkan bahwa peningkatan temperatur udara keluar umumnya mempercepat laju penguapan karena perbedaan tekanan uap yang lebih besar, namun dapat menurunkan efisiensi energi apabila tidak dikendalikan dengan baik. Sebaliknya, pengaturan aliran udara dan gradien temperatur yang moderat dapat menghasilkan penguapan yang stabil dengan kehilangan energi yang lebih rendah. Kajian ini menekankan pentingnya keseimbangan antara parameter termal dan aerodinamik untuk mencapai proses penguapan yang efektif dan berkelanjutan.

Unduhan

Data unduhan belum tersedia.

Referensi

R. K. Das and A. Date, “Sustainable watedesalination using eductor and waste heat: A review and suggestion for future research,” Desalination, vol. 603, no. October 2024, p. 118687, 2025, doi: 10.1016/j.desal.2025.118687.

M. Shojaei et al., “Performance analysis of a direct contact humidifier of a humidification-dehumidification desalination system: A heat and mass transfer,” Desalin. Water Treat., vol. 12, no. 1, pp. 49–55, 2017, doi: 10.23960/mech.v6.i1.201507.

W. Zhang, X. Du, L. Yang, and Y. Yang, “Research on Performance of Finned Tube Bundles of Indirect Air-cooled Heat Exchangers,” Math. Model. Eng. Probl., vol. 3, no. 1, pp. 47–51, 2016, doi: 10.18280/mmep.030108.

D. Charitar and A. Madhlopa, “Integration of waste heat in thermal desalination technologies: A review,” J. Energy South. Africa, vol. 33, no. 1, pp. 68–84, 2022, doi: 10.17159/2413-3051/2022/v33i1a5434.

S. KUMAR and P. CHANDRA, “Experimental investigation of axial finned tube evaporator thermal distillation system using for diesel engine waste heat recovery process,” J. Therm. Eng., vol. 10, no. 2, pp. 479–489, 2024, doi: 10.18186/thermal.1456708.

D. S. Wijayanto, Soenarto, M. B. Triyono, W. Prasetyo, and I. Widiastuti, “Analysis of Longitudinal Finned Pipes in Cross-Flow Heat Exchanger,” Int. J. Heat Technol., vol. 39, no. 6, pp. 1909–1916, 2021, doi: 10.18280/ijht.390627.

M. O. Khalaf, M. R. Özdemir, and H. S. Sultan, “A Comprehensive Review of Solar Still Technologies and Cost: Innovations in Materials, Design, and Techniques for Enhanced Water Desalination Efficiency,” Water (Switzerland), vol. 17, no. 10, pp. 1–55, 2025, doi: 10.3390/w17101515.

G. Cui, M. Bi, and C. Liu, “Design and experimental validation of a six-effect multi-effect evaporation plant utilized in oilfield,” Desalin. Water Treat., vol. 217, pp. 111–126, 2021, doi: 10.5004/dwt.2021.26891.

A. T. S. Haji, R. Wirosoedarmo, and M. W. Tyas, “Analisis Nomografi Suhu, Laju Penguapan dan Tekanan Udara untuk Perancangan Alat Desalinasi Tenaga Surya Dengan Pengaturan Vakum,” J. Sumberd. Alam dan Lingkung., vol. 4, no. 2, pp. 1–6, 2017, doi: 10.21776/ub.jsal.2017.004.02.1.

I. Sulistiono, D. Mugisidi, Nurkholid, and Oktarina Heriyani, “Effect of wind speed on evaporation rate in air conditioner based desalination units,” TEKNOSAINS J. Sains, Teknol. dan Inform., vol. 12, no. 1, pp. 54–61, 2025, doi: 10.37373/tekno.v12i1.1238.

Y. Effendi and A. Rosyidin, “Efek vortex generators terhadap peningkatan perpindahan panas pada aliran melewati heated tubes,” Turbo J. Progr. Stud. Tek. Mesin, vol. 9, no. 2, pp. 221–227, 2020, doi: 10.24127/trb.v9i2.1303.

T. M. Thomas and P. S. Mahapatra, “A plate-type condenser platform with engineered wettability for space applications,” 2023, [Online]. Available: http://arxiv.org/abs/2305.19070

O. Heriyani, D. Mugisidi, and I. Hilmi, “Effect of Cylinder Surface Roughness To the Distance Formation of Vortex,” SINTEK J. J. Ilm. Tek. Mesin, vol. 14, no. 2, p. 94, 2020, doi: 10.24853/sintek.14.2.94-98.

A. T. Sayuti, D. Mugisidi, R. Wirangga, and O. Heriyani, “The Influence of Water Temperature on Seawater Evaporation in the Desalination Process,” SINTEK J. J. Ilm. Tek. Mesin, vol. 17, no. 2, p. 113, 2023, doi: 10.24853/sintek.17.2.113-119.

M. Fahri Fadlu Robbi and B. Yunianto, “Studi Numerik Pengaruh Aspek Rasio Dari Perforated Concave Delta Winglet Terhadap Performa Termal-Hidrolik Aliran Udara Melewati Tube Di Dalam Saluran,” J. Tek. Mesin S-1, vol. 11, no. 3, p. 201, 2023.

I. Yaningsih and T. Istanto, “Pengaruh Jenis Humidifier (Spray Humidifier dan Pad Humidifier)Terhadap Produktivitas Unit Desalinasi Berbasis Pompa Kalor Dengan Menggunakan Proses Humidifikasi dan Dehumidifikasi,” Mechanical, vol. 6, no. 1, pp. 49–55, 2015, doi: 10.23960/mech.v6.i1.201507.

A. P. H. J. Gajanan Kalyankar, “Heat Transfer Enhancement Through Swirl Flow Devices,” Int. J. Innov. Eng. Res. Technol., vol. 2018, pp. 198–200, 2018.

M. Fiebig, A. Grosse-Gorgemann, Y. Chen, and N. K. Mitra, “Conjugate heat transfer of a finned tube part a: Heat transfer behavior and occurrence of heat transfer reversal,” Numer. Heat Transf. Part A Appl., vol. 28, no. 2, pp. 133–146, 1995, doi: 10.1080/10407789508913737.

M. D. De Carvalho, J. S. Dos Reis Coimbra, T. S. M. Lemos, J. D. A. Bellido, and A. M. de O. Siqueira, “a Review of Humidification-Dehumidification Desalination Systems,” Int. J. Res. -GRANTHAALAYAH, vol. 8, no. 5, pp. 290–311, 2020, doi: 10.29121/granthaalayah.v8.i5.2020.225.

V. G. Gude, “Exergy evaluation of desalination processes,” ChemEngineering, vol. 2, no. 2, pp. 1–27, 2018, doi: 10.3390/chemengineering2020028.

T. " Peringkat, A. Oktavian, D. Mugisidi, R. Alamsyach, and O. Heriyani, “Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan Inovasi Convective Coefficient and Evaporative in Forced Flow Solar Still Koefisien Konveksi dan Evaporasi pada Solar Still Aliran Paksa Article information,” vol. 6, pp. 351–360, 2024.

W. Chamsa-ard, D. Fawcett, C. C. Fung, and G. Poinern, “Solar Thermal Energy Stills for Desalination: A Review of Designs, Operational Parameters and Material Advances,” J. Energy Power Technol., vol. 2, no. 4, 2020, doi: 10.21926/jept.2004018.

H. Yang, C. Yang, and L. Geng, “Thermodynamic limits of humidifiers and dehumidifiers,” iScience, vol. 27, no. 7, p. 110277, 2024, doi: 10.1016/j.isci.2024.110277.

A. H. Mohammed, A. N. Shmroukh, N. M. Ghazaly, and A. E. Kabeel, “Active solar still with solar concentrating systems, Review,” J. Therm. Anal. Calorim., vol. 148, no. 17, pp. 8777–8792, 2023, doi: 10.1007/s10973-023-12285-z.

C. Z. Liang, M. Askari, L. T. (Simon) Choong, and T. S. Chung, “Ultra-strong polymeric hollow fiber membranes for saline dewatering and desalination,” Nat. Commun., vol. 12, no. 1, 2021, doi: 10.1038/s41467-021-22684-1.

J. Liu, Y. Sun, Y. Zhang, and J. Wang, “Theoretical Study of a Closed-Cycle Evaporation System for Seawater Desalination,” Separations, vol. 10, no. 5, 2023, doi: 10.3390/separations10050319.

O. Younis et al., “Comprehensive Review on Solar Stills—Latest Developments and Overview,” Sustain., vol. 14, no. 16, 2022, doi: 10.3390/su141610136.

N. Ghazouani et al., “Greenhouse Desalination by Humidification–Dehumidification Using a Novel Green Packing Material,” Water (Switzerland), vol. 14, no. 6, pp. 1–14, 2022, doi: 10.3390/w14060869.

N. Ghazouani, A. A. El-bary, G. E. Hassan, N. Becheikh, and A. Bawadekji, “Solar Desalination by Humidification – Dehumidification :,” 2022.