Rancang Bangun Robot Pemungut dan Pelontar Bola sebagai Sarana Pendukung Pelatihan Atlet Penjaga Gawang Permainan Futsal
DOI:
https://doi.org/10.22236/teknoka.v9i1.17521Keywords:
robot, pemungut, pelontar, bola, futsalAbstract
Goalkeepers need to practice their abilities in protecting the goal. Coaches often use ball throwing machines to train goalkeepers because the machine's throwing power tends to be stable and more controllable than humans. The current ball throwing machine still requires human assistance to pick up the ball from the floor, making the machine still very dependent on humans in picking up the ball. This research aims to design a ball throwing machine that has the additional capability of being able to pick up the ball from the floor and then throw it into the goal. By using rotating rubber cylinders, futsal balls that are on the ground can be picked up by the machine and then pushed to the throwing wheel. The torque and high rpm motor on the throwing wheel is capable of throwing the ball up to a distance of 4 meters. By using a combination of 4 omni wheels, a ball throwing machine can be built that is capable of moving with 3 degrees of freedom, namely forward-backward, turning right-left, and sliding right-left.
Downloads
References
E. Saefudin, N. Nugraha, and H. Y. Yosman, "Rancang Bangun Omni Wheel Pada Forklift Automated Guided Vehicle," Jurnal Rekayasa Energi dan Mekanika, vol. 3, no. 1, p. 32, 2023, https://doi.org/10.26760/JREM.v3i1.32
A. Amperawan, D. Andika, M. Anisah, and I. J. Marcelinus, "Sistem Deteksi Posisi Dan Pengambilan Bola Pada Robot Sepak Bola," Jurnal Ampere, vol. 7, no. 1, pp. 28-38, 2022, https://doi.org/10.31851/ampere.v7i1.8507
S. P. Santosa and M. W. Nugroho, "Rancang Bangun Alat Pintu Geser Otomatis Menggunakan Motor DC 24 V," JURNAL ELEKTRO, vol. 9, no. 1, pp. 38-45, 2021, https://jurnalteknik.unkris.ac.id/index.php/jie/article/view/123
H. Saptono, G. E. Pramono, and H. Al Khindi, "Analisa daya dan kontrol kecepatan motor pada alat bantu las rotary positioner table," AME (Aplikasi Mekanika dan Energi): Jurnal Ilmiah Teknik Mesin, vol. 4, no. 1, pp. 23-33, 2018, https://doi.org/10.32832/ame.v4i1.988
Antonov and Y. Oktariani, "Studi pengaruh torsi beban terhadap kinerja motor induksi tiga fase," Jurnal Teknik Elektro, vol. 5, no. 1, pp. 9-15, 2016, https://jte.itp.ac.id/index.php/jte/article/view/645
S. N. Rahman, L. Jafnihirda, and T. A. Putra, "Arduino sebagai Pengontrol Smart Vivarium dengan Notifikasi menggunakan Android," Jurnal KomtekInfo, vol. 7, no. 4, pp. 260-269, 2020, https://doi.org/10.35134/komtekinfo.v7i4.87
P. Sokibi and R. A. Nugraha, "Perancangan Prototype Sistem Peringatan Indikasi Kebakaran Di Dapur Rumah Tangga Berbasis Arduino Uno," Jurnal Digit: Digital of Information Technology, vol. 10, no. 1, pp. 11-22, 2020, https://doi.org/10.51920/jd.v10i1.152
A. Fatoni, D. D. Nugroho, and A. Irawan, "Rancang bangun alat pembelajaran microcontroller berbasis atmega 328 di universitas serang raya," PROSISKO: Jurnal Pengembangan Riset dan Observasi Sistem Komputer, vol. 2, no. 1, 2015, https://e-jurnal.lppmunsera.org/index.php/PROSISKO/article/view/93
D. Michael and D. Gustina, "Rancang Bangun Prototype Monitoring Kapasitas Air Pada Kolam Ikan Secara Otomatis Dengan Menggunakan Mikrokontroller Arduino," IKRA-ITH INFORMATIKA: Jurnal Komputer Dan Informatika, vol. 3, no. 2, pp. 59-66, 2019, https://journals.upi-yai.ac.id/index.php/ikraith-informatika/article/view/319
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Prosiding Seminar Nasional Teknoka
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Supported by :
