Review Prototipe Pendingin Mesin Kecil Berbasis Teknologi Peltier
DOI:
https://doi.org/10.22236/teknoka.v10i1.22731Keywords:
Peltier, Small engine cooler, Performance, prototype, AnalysisAbstract
Peltier technology uses the thermoelectric effect to transfer heat from one part of the module to another, allowing it to function as a cooler or heater without moving mechanical components. Despite its advantages in terms of reliability and environmental compatibility, Peltier modules still lack energy efficiency compared to traditional cooling systems. Previous research has focused on improving performance through innovations in semiconductor materials, thermal system design, and optimization techniques. In applications to small machines, key challenges include managing the heat on the hot side, incorporating compact designs, and maintaining stable operating temperatures. However, research findings indicate that with appropriate design and material advancements, Peltier modules have the potential to provide efficient and sustainable cooling solutions for low-power machines and portable biomedical devices.
Downloads
References
S. B. Riffat and X. Ma, “Thermoelectrics: A review of present and potential applications,” Appl. Therm. Eng., vol. 23, no. 8, pp. 913–935, 2003, doi: 10.1016/S1359-4311(03)00012-7.
B. Suhani and S. Bhatia, “A review on thermoelectric cooling technology and its applications,” Int. Conf. Adv. Mech. Eng., vol. 912, pp. 1–12, 2020, doi: 10.1088/1757-899X/912/4/042004.
T. N. Widianto and A. R. Hakim, “Performansi Pendingin Termoelektrik Alat Transportasi Ikan Segar pada Berbagai Tegangan (Thermoelectric Performance of Refrigerated Fish Container at Various Voltages),” Agritech, vol. 36, no. 4, p. 485, 2017, doi: 10.22146/agritech.16777.
EL-Shabrawy, “New Apparatus To Raise the Performance of Engine Cooling Water Cycle,” Misr J. Agric. Eng., vol. 32, no. 4, pp. 1671–1684, 2015, doi: 10.21608/mjae.2015.97841.
C. Lin, “Analytical parametrization for magnetization of Gadolinium based on scaling hypothesis,” Phys. A Stat. Mech. its Appl., vol. 617, 2023, doi: 10.1016/j.physa.2023.128686.
T. Arisaka, M. Otsuka, and Y. Hasegawa, “Measurement of thermal conductivity and specific heat by impedance spectroscopy of Bi 2 Te 3 thermoelectric element,” Rev. Sci. Instrum., vol. 90, no. 4, 2019, doi: 10.1063/1.5079832.
V. K. Pecharsky and K. A. Gschneidner, “Giant magnetocaloric effect in Gd5 (Si2 Ge2),” Phys. Rev. Lett., vol. 78, no. 23, pp. 4494–4497, 1997, doi: 10.1103/PhysRevLett.78.4494.
G. Bianchi, G. Besagni, S. A. Tassou, and C. N. Markides, “Overview and outlook of research and innovation in energy systems with carbon dioxide as the working fluid,” Appl. Therm. Eng., vol. 195, no. June, 2021, doi: 10.1016/j.applthermaleng.2021.117180.
D. J. Silva, B. D. Bordalo, A. M. Pereira, J. Ventura, and J. P. Araújo, “Solid state magnetic refrigerator,” Appl. Energy, vol. 93, pp. 570–574, 2012, doi: 10.1016/j.apenergy.2011.12.002.
S. Efromovich, “Springer Series in Statistics Springer Series in Statistics,” pp. 1–656, 1999, doi: 10.1007/978-0-387-98135-2.
S. Mihalache, I. Flamaropol, F. S. Dumitru, L. Dobrescu, and D. Dobrescu, “Automated cooling control system through Peltier effect and high efficiency control using a DC-DC Buck converter,” Proc. Int. Semicond. Conf. CAS, vol. 2015-Decem, pp. 281–284, 2015, doi: 10.1109/SMICND.2015.7355233.
G. J. Snyder and E. S. Toberer, “Complex thermoelectric materials,” Nat. Mater., vol. 7, no. 2, pp. 105–114, 2008, doi: 10.1038/nmat2090.
S. Triyono, H. Muchtar, and W. Sudarwati, “Perancangan Pendingin Minuman Portable Menggunakan Efek Peltier Berbasis Raspberry-Pi,” Telekomun. Tenaga List., vol. 7, no. 1, pp. 2–5, 2024.
J. B. Pendry and A. MacKinnon, “Calculation of photon dispersion relations,” Phys. Rev. Lett., vol. 69, no. 19, pp. 2772–2775, 1992, doi: 10.1103/PhysRevLett.69.2772.
S. Y. Dan’kov, A. Tishin, V. Pecharsky, and K. Gschneidner, “Magnetic phase transitions and the magnetothermal properties of gadolinium,” Phys. Rev. B - Condens. Matter Mater. Phys., vol. 57, no. 6, pp. 3478–3490, 1998, doi: 10.1103/PhysRevB.57.3478.
M. Nurul Achmadiah, Yulianto, and A. ikhlasul Amal, “Perancangan smart food box menggunakan modul termoelektrik peltier berbasis internet of things (IOT),” J. Elektron. dan Otomasi Ind., vol. 10, no. 3, pp. 292–299, 2023, doi: 10.33795/elkolind.v10i3.4398.
K. Klinar, U. Tomc, B. Jelenc, S. Nosan, and A. Kitanovski, “New frontiers in magnetic refrigeration with high oscillation energy-efficient electromagnets,” Appl. Energy, vol. 236, no. December, pp. 1062–1077, 2019, doi: 10.1016/j.apenergy.2018.12.055.
M. Ben Zohra, A. Riad, and A. Alhamany, “Optimizing the conception of hybrid PV/PCM by optimizing the heat transfer at the contact interface and by integrating two types of PCM,” Results Eng., vol. 16, no. June, p. 100614, 2022, doi: 10.1016/j.rineng.2022.100614.
B. Worsztynowicz, “Experimental verification of design calculations of the internal combustion engine cooling system,” Combust. Engines, vol. 179, no. 4, pp. 132–135, 2019, doi: 10.19206/ce-2019-421.
K. Engelbrecht and C. R. H. Bahl, “Evaluating the effect of magnetocaloric properties on magnetic refrigeration performance,” J. Appl. Phys., vol. 108, no. 12, 2010, doi: 10.1063/1.3525647.
R. Weerasinghe and T. Hughes, “Numerical and experimental investigation of thermoelectric cooling in down-hole measuring tools; A case study,” Case Stud. Therm. Eng., vol. 10, pp. 44–53, 2017, doi: 10.1016/j.csite.2017.02.002.
A. Abdalla Elian, W. Aissa, O. Dahab, and M. F. Cidek, “Enhancement of Water Cooled Internal Combustion Engines Using Peltier Effect,” Int. J. Appl. Energy Syst., vol. 2, no. 2, pp. 65–70, 2020, doi: 10.21608/ijaes.2020.169449.
W. Lyskawinski and W. Szelag, “Analysis of cooling and heating system with Peltier cell,” ITM Web Conf., vol. 19, p. 01032, 2018, doi: 10.1051/itmconf/20181901032.
S. Lionte, M. Risser, C. Vasile, L. Elouad, and C. Muller, “Adapting an active magnetic regenerator to a continuous fluid flow application,” Int. J. Refrig., vol. 85, pp. 303–313, 2018, doi: 10.1016/j.ijrefrig.2017.10.009.
I. Terasaki, “Introduction to thermoelectricity,” Mater. energy Convers. devices, pp. 339–357, 2011, doi: 10.1533/9781845690815.3.339.
C. Lin, “Magnetic cooling with thin Peltier modules as thermal switches,” J. Magn. Magn. Mater., vol. 570, 2023, doi: 10.1016/j.jmmm.2023.170482.
H. S. Kim, K. Kikuchi, T. Itoh, T. Iida, and M. Taya, “Design of segmented thermoelectric generator based on cost-effective and light-weight thermoelectric alloys,” Mater. Sci. Eng. B, vol. 185, no. 1, pp. 45–52, 2014, doi: 10.1016/j.mseb.2014.02.005.
H. J. Goldsmid, “Bismuth telluride and its alloys as materials for thermoelectric generation,” Materials (Basel)., vol. 7, no. 4, pp. 2577–2592, 2014, doi: 10.3390/ma7042577.
A. Kitanovski, “Energy Applications of Magnetocaloric Materials,” Adv. Energy Mater., vol. 10, no. 10, 2020, doi: 10.1002/aenm.201903741.
B. Monfared and B. Palm, “Optimization of layered regenerator of a magnetic refrigeration device,” Int. J. Refrig., vol. 57, no. November, pp. 103–111, 2015, doi: 10.1016/j.ijrefrig.2015.04.019.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Prosiding Seminar Nasional Teknoka
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Supported by :
