Karakteristik Aliran dan Perpindahan Panas terhadap Variasi Geometri Alat Penukar Kalor Fin-and-Tube

Authors

  • M. Iqbal Farhan Putra Arya Universitas Diponegoro
  • Oktarina Heriyani Universitas Diponegoro
  • Muhamad Safi’i Universitas Diponegoro

Keywords:

perpindahan panas, kecepatan aliran, pressure drop, alat penukar kalor

Abstract

Peningkatan laju perpindahan panas pada alat penukar kalor jenis fin-and-tube menjadi topik yang menarik untuk diinvestigasi. Hal ini dapat dilakukan dengan memodifikasi geometri fin-and-tube untuk mengetahui karakteristik aliran dan perpindahan panas yang terjadi di sekitar saluran. Modifikasi geometri yang diterapkan adalah bentuk square dan diamond yang disusun secara staggered. Kemudian, aliran udara yang masuk ke dalam saluran sirip divariasikan pada rentang bilangan Reynolds 133 hingga 931 yang seharusnya jenis alirannya adalah laminar. Hasil studi ini menunjukkan bahwa perpindahan panas dan pressure drop pada bentuk square lebih baik daripada diamond. Hal ini ditunjukkan pada tingginya nilai koefisien perpindahan panas konveksi dan rendahnya pressure drop aliran.

Downloads

Download data is not yet available.

Author Biographies

M. Iqbal Farhan Putra Arya, Universitas Diponegoro

Fakultas Teknik

Teknik Mesin

Oktarina Heriyani, Universitas Diponegoro

Fakultas Teknik

Teknik Mesin

Muhamad Safi’i, Universitas Diponegoro

Fakultas Teknik

Teknik Mesin

References

Ahmed, S.F., Saha, S.C., Debnath, J.C., Liu, G., Mofijur, M., Baniuounes, A., Chowdhury, S.M.E.K. & Vo, D.V.N., Data‑driven modelling

techniques for earth‑air heat exchangers to reduce energy consumption in buildings: a review, Environmental Chemistry Letters, vol. 19, pp. 4191-4210, 2021, 10.1007/s10311-021-01288-7.

Sheikholeslami, M., Farshad, S.A., Gerdroodbary, M.B. & Alavi, A.H., Impact of new multiple twisted tapes on treatment of solar heat exchanger, The European Physical Journal Plus, vol. 137, pp. 1-19, 2022, 10.1140/epjp/s13360-021-02157-6.

Joadar, A. & Jacobi, A.M., Heat transfer enhancement by winglet-type vortex generator arrays in compact plain-fin-and-tube heat exchangers, International Journal of Refrigeration, vol. 31, pp. 87-97, 2008, 10.1016/j.ijrefrig.2007.04.011.

Hosseinirad, E., Aliabadi, M.K. & Hormozi, F., Evaluation of heat transfer and pressure drop in a mini-channel using transverse rectangular vortex-generators with various non-uniform heights, Applied Thermal Engineering, vol. 161, pp. 114196, 2019. 10.1016/j.applthermaleng.2019.114196.

Gholami, A.A., Wahid, M.A. & Mohammed, H.A., Heat transfer enhancement and pressure drop for fin-and-tube compact heat exchangers with wavy rectangular winglet-type vortex generators, International Communications in Heat and Mass Transfer, vol. 54, pp. 132-140, 2014, 10.1016/j.icheatmasstransfer.2014.02.0160735-1933.

Tao, Y.B., He, Y.L., Huang, J., Wu, Z.G. & Tao, W.Q., Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-andtube heat exchangers, International Journal of Thermal Sciences, vol. 46, pp. 768-778, 2007, 10.1016/j.ijthermalsci.2006.10.004.

Kim, Y. & Kim, Y., Heat transfer characteristics of flat plate finned-tube heat exchangers with large fin pitch, International Journal of Refrigeration, vol. 28, pp. 851-858, 2005, 10.1016/j.ijrefrig.2005.01.013.

Wang, C.C. & Chi, K.Y., Heat transfer and friction characteristics of plain fin-and-tube heat exchangers, part I: new experimental data, International Journal of Heat and Mass Transfer, vol. 43, pp. 2681-2691, 2000, 10.1016/S0017-9310(99)00332-4.

Zheng, N., Liu, P., Shan, F., Liu, J., Liu, Z. & Liu, W., Numerical studies on thermo-hydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods, International Journal of Thermal Sciences, vol. 100, pp. 448-456, 2016, 10.1016/j.ijthermalsci.2015.09.008.

Zheng, N., Liu, P., Wang, X., Shan, F., Liu, Z. & Liu, W., Numerical simulation and optimization of heat transfer enhancement in a heat exchanger tube fitted with vortex rod inserts, Applied Thermal Engineering, vol. 123, pp. 471-484, 2017, 10.1016/j.applthermaleng.2017.05.112.

Gong, B., Wang, L.B. & Lin, Z.M., Heat transfer characteristics of a circular tube bank fin heat exchanger with fins punched curve rectangular vortex generators in the wake regions of the tubes, Applied Thermal Engineering, vol. 75, pp. 224-238, 2015,

1016/j.applthermaleng.2014.09.043.

Lu, G. & Zhou, G., Numerical simulation on performances of plane and curved winglet type vortex generator pairs with punched holes, International Journal of Heat and Mass Transfer, vol. 102, pp. 679-690, 2016, 10.1016/j.ijheatmasstransfer.2016.06.063.

Chimres, N., Wang, C.C. & Wongwises, S., Optimal design of the semi-dimple vortex generator in the fin and tube heat exchanger, International Journal of Heat and Mass Transfer, vol. 120, pp. 1173-1186, 2018, 10.1016/j.ijheatmasstransfer.2017.11.121.

Published

2022-12-23

How to Cite

Putra Arya, M. I. F., Heriyani, O., & Safi’i, M. (2022). Karakteristik Aliran dan Perpindahan Panas terhadap Variasi Geometri Alat Penukar Kalor Fin-and-Tube. Prosiding Seminar Nasional Teknoka, 7, 31–37. Retrieved from https://journal.uhamka.ac.id/index.php/teknoka/article/view/11051