Implementation of Temperature Detector Using BMP280 Sensor on Chili Plant Cultivation

Authors

  • Nisrina Febby Fakhirah Universitas Muhammadiyah Prof. Dr. Hamka
  • Sofia Pinardi Universitas Muhammadiyah Prof. Dr. HAMKA
  • Rosalina Rosalina Universitas Muhammadiyah Prof. Dr. HAMKA
  • Mohammad Mujirudin Universitas Muhammadiyah Prof. Dr. HAMKA
  • Kun Fayakun Universitas Muhammadiyah Prof. Dr. HAMKA

DOI:

https://doi.org/10.22236/ate.v3i1.12411

Keywords:

Arduino Uno, BMP 280, Sensor

Abstract

To avoid the emergence of various problems in the cultivation of chili plants, it is necessary to do maintenance efforts properly and correctly. Observation or observation is one of the 4 main things in the maintenance of chili plants. This effort is made to achieve maximum effectiveness and final results. Thus, the cultivation of chili plants can be carried out sustainably and the products are safe for consumption. One of the parameters that need to be considered in the cultivation of chili plants is air temperature. This research will discuss how to design a temperature detector using a BMP280 sensor and its implementation on chili plants in different regions. This research aims to determine the air temperature in a particular region using the designed detector, then compare it with HTC-01. If the detector design is successful, then further research will be implemented on chili plants in different regions. This research uses two research methods, namely the participant observation method and the sensor accuracy test method. Based on the measurement data, the mountainous area is most suitable for chili plants because it has a temperature of ± 31 ° C and it has been known that the BMP 280 Sensor has an accuracy of > 95% when compared to the HTC-01.

Downloads

Download data is not yet available.

Author Biographies

Nisrina Febby Fakhirah, Universitas Muhammadiyah Prof. Dr. Hamka

Department of Electrical Engineering

Sofia Pinardi, Universitas Muhammadiyah Prof. Dr. HAMKA

Department of Electrical Engineering

Rosalina Rosalina, Universitas Muhammadiyah Prof. Dr. HAMKA

Department of Electrical Engineering

Mohammad Mujirudin, Universitas Muhammadiyah Prof. Dr. HAMKA

Department of Electrical Engineering

Kun Fayakun, Universitas Muhammadiyah Prof. Dr. HAMKA

Department of Electrical Engineering

References

D. Pertanian, Standar Operasional Prosedur Budidaya Cabe Rawit. 2009.

F. and A. [FAO], “Budidaya Cabai yang Baik dan Benar,” Food Agric. Organ. United Nation, p. 16, 2013.

G. D. Winarno, S. P. Harianto, and R. Santoso, Klimatologi Pertanian. Bandar Lampung, 2019.

D. Pertanian, Standar Operasional Prosedur Cabai Merah. 2007.

W. K. S. Achmad, S. Jauhar, D. Nonci, and A. Syawaluddin, Konsep Dasar IPS. AGMA, 2016.

M. Yusro and A. Diamah, Sensor dan Transduser Teori dan Aplikasi. 2019.

D. Sasmoko, Arduino dan Sensor, vol. 1. 2021.

P. N. Bali, Buku Teks Mikrokontroler ( Chapter Eight ) Buku Teks Mikrokontroler, no. October. 2021.

Faradiba, “Metode Pengukuran Fisika,” Buku Mater. Pembelajaran Metod. Pengukuran Fis., pp. 1–195, 2020.

M. F. Ardiansyah, “Pengembangan Alat Pembuat Peta Konsentrasi Gas, Suhu, dan Kelembaban pada Pesawat Tanpa Awak,” Institut Teknologi Sepuluh Nopember, 2019. [Online]. Available: https://repository.its.ac.id/60812/%0Ahttps://repository.its.ac.id/60812/1/07111440007005-Undergraduate_Theses.pdf

A. Kadir, From Zero to A Pro Arduino. Yogyakarta: ANDI Yogyakarta, 2015.

Tinkbox, “KEYES 5V Relay Module,” pp. 1–4, 2014.

R. N. Brilian, “Sistem Kendali Aliran Air Bldc Motor Water Pump Pada Miniatur Sprinkle Irrigation Untuk,” 2018.

Published

2023-08-02